| Power Requirements |
|
| Voltage Input (Primary Source:) |
16-18V AC 50-60Hz – 24VA External Power Adaptor or 220-240V AC to 18V AC 50-60Hz – 24VA Internal Transformer |
| Stand-By Battery (Secondary Source): |
12V DC, 7.2AH sealed rechargeable battery Panasonic LC-P12R2P or equivalent. Resettable Fuse Protected @ 3 Amps |
| Voltage Output: |
13.8V DC @ 1 Amp. Ripple 100mV @ Full Load (Primary supply source only) |
| Battery Monitoring: |
11.5V DC Low battery trouble at keypads, low battery report sent (if programmed) 10.0V DC Shut down as voltage fails below 9V DC13.0V DC Battery trouble clears from keypads, battery restore report sent (if programmed) |
| Connections |
|
| Module Connection (RS485 LAN): |
Max total LAN length using multi strand security cable = 300mMax total LAN length using 2 pair twisted shielded data cable (Belden 8723) = 1200m |
| Outputs: |
3 Output Terminals providing a total of 1 Amp output current (Resettable Fuse Protected) AC Fail – 50mA Max – Sink – 120mA – Overload Protected Low Battery – 50mA Max – Sink – 120mA – Overload Protected |
| Inputs: |
Cabinet Tamper |
| Environmental Considerations |
|
| Temperature: |
0o to 55oC Operating |
| Humidity: |
5% to 85% at 30oC non-condensing |
| Enclosure |
|
| Dimensions: |
115(W) x 86(D) x 30(H)mm |
| Warranty: |
3 years |
